In order to configure/restore your device on to the manufacturers default settings kindly perform the following steps:
1. Make sure your CPE is powered on.
2. On the back of the CPE there is a "RESET" pin; Kindly press on to the Reset pin for a minimum of 10 seconds.
3. Let go of the RESET pin after 10 seconds and then wait till the device synchronizes with your computer.
This would reboot the device and restore the default configuration of the CPE. Once you have performed the above mentioned operation please log on to the CPE as follows:
1. Open the browser window and and type "http://192.168.15.1" and press ENTER.
2. This would display the Motorola WIMAX CPE screen which would prompt you for a password.
In case you still face any issues kindly feel free to contact me :)
doing so will reset all the settings and config, I doubt that your device will work after that, you will have to get it reprogrammed from provider once again
so everyone. try this at your own *risk*
i need help guys ! i cannot configure my CPEi35775 no problem on d default password motorola ! but i cant change d password, there supposed to be a box were you can type the new password and confirmation box isnt it ? they dont appear ! also my wifi is in open mode and i cant disable it ! each time i un checked d box and press apply nothing hapen ! please help me ! the whole town is using my internet.....
Dear i have wateen Device, i have Id jamil64@wateen.net but i did not use this device from last one year. now i for time pass i connect this device to my Laptop , it required longin pass,
Hi, Omair, I am using wateen device and my IP is using other people through WIFi while I switch on my wateen device please suggest how to stop others from using my IP through wIfI ?
Thanks
MAK
Yep, my Clear WiMax Motorola password has changed too. I wonder whose bright idea that was?
Since I live in one of the Clear WiMax "poor reception zone" scattered through the Las Vegas valley, I need to access the CINR and RSSI statistics to get better reception as WiMax transmit towers are added, removed or reoriented in a different direction.
Anyone with the new password, please post or email to me.
Hey, I started with MOTOROLA, was switched to CLEAR123, and now am locked out again...??? don't know why the are locking this device?
any one know the " new" password?
Why did they change it, anyone know? I own my CPE (I bought it instead of leased it) so I don't fancy the idea of them just changing the password on it without telling me about it. It's my hardware.
@Captain, I tried an earlier suggestion as mine was flashed today as well and the password (in all CAPS) is CLEAR123 once I logged in I again just unchecked the need for the password. Right now I use a router on my WiMax CPE modem, and what I do is I statically set the IP of the router, and I enable DMZ from the modem to the router, treats it like normal from there on.
Since all our passwords have been reset to CLEAR123, i bet it's some sort of servicing, note there's no way to manually set the software from the browser interface. Don't sweat it, so long as clear is in control of your CPE and not someone else.
It was "motorola" up until last night, Clear must have flashed it. It rather irks me that they can do that without any warning. We're a double NAT, we need access to the modem to make it play nice with the other children.
hi i have a thomson router and when try to log into it with 192.168.15.1 i get motorola wimax cpe, it asked me for a password which i dont have, im now after resetting my thomson router and im after trying nearly every default password out there and stiil cant get in.can any 1 please help :)
Anybody knows default password of WiMAX CPEs from this weird Chinese company called Airspan. My service provider supplied it for my connection.
I contacted them regarding this and they requested I contact them from a corporate email address....how nonsensical for a CPE I bought and is stationed at my house...
i need help on my WIMAX CPEi35775 i tried to reset it on the reset pin on the back, then when i login to"http://192.168.15.1" password is motorola ! it works but if i try to change the password apply button is not working. even on the wifi if i uncheck the box and press apply its not working, the wifi is in open mode so everyone in my erea is using it and i cant do anything about it, i need help ASAP.
Hi, I've a CPEi35775 and I'm with Imagine. I'm trying to put my console into a DMZ but wasn't given the password for this, does anyone know the current default?
Just try to press login without typing any password. It happened to me. The original password was "motorola", I tried to change it to something else, then, I wasn't able to log in by Motorola or any other password. I kept trying for more than six months. Only yesterday, I tried to login without entering any password and it worked for me.
It seems there is some problem with the device software....
Hey my wimax CPEi35775 wouldint accept the password i changed it to for a few months. It didint bother me at first but i want to open up my own server for a game and need to forward a certain port.
I tryed motorola - clear123 - CLEAR123 + 4 - original password - no password.
Am all ready tried default password ...but its didn't working ...my modem.192.168.15.1 I enter this gateway and came also Motorola wimax cpe page and i had put default password Motorola..but i cant go,what will do.....?
that right password is motorola ok good luck so now clear is much better than all mobile phone verizon is big rip off charge too much money and the best is clear modem is better speed than DSL
Salam Guys
i have Motorla Model : CPEi 35300 . i want to change pasward. neither motorola works no clear123.
how can i change it plz help, ishfaqurrehman@rocketmail.com
+923219088597
salam sir plzzz help me me motorola wimax cpei 300 ki device use kar rha hoon me is address par jata hoon 192.168.15.1 to wo password magta he me motorola password dal ta hoon open nahi hota phir me password dalta hoon admin tab bhi open nahi hota phir me password dalta hoon password phir bhi open nahi hota phir me password dalta hoon clear123 tab bhi open nahi hota sir kia problem he
Does anyone know the password for motorola cpei 300?It isn't 'motorola' and I need to login, to do some port forwarding so my torrent download speeds can be faster.
As of Aug 2012, none of these pw works for me. I reset the button at the modem for 5 sec and it rebooted the device. Then I tried CLEAR123, motorola, Clear123, Admin. None works. Anyone knows a new default pw? Clear clearly sucks.
why wont this work?!?! this is really annoying me, ive tried about 50 different passwords for this and none of them work. i typer in 192.168.15.1 and it asks me for a password. ive tried blank, motorola, admin, password, clear123, CLEAR123, clear123+4 and CLEAR123+4. someone please help me :(
Motorola Password
Comments
If the password does not work or if you have some updated information then post here
Uhm is there a way my ISP had changed it? if so, I guess I must talk to them.
Thanks.
In order to configure/restore your device on to the manufacturers default settings kindly perform the following steps:
1. Make sure your CPE is powered on.
2. On the back of the CPE there is a "RESET" pin; Kindly press on to the Reset pin for a minimum of 10 seconds.
3. Let go of the RESET pin after 10 seconds and then wait till the device synchronizes with your computer.
This would reboot the device and restore the default configuration of the CPE. Once you have performed the above mentioned operation please log on to the CPE as follows:
1. Open the browser window and and type "http://192.168.15.1" and press ENTER.
2. This would display the Motorola WIMAX CPE screen which would prompt you for a password.
In case you still face any issues kindly feel free to contact me :)
Regards,
Omair Anwer
so everyone. try this at your own *risk*
ibraralionline007@gmail.com
please tell motorola wimax 162,168.15.1 password i want to change the ip address
what if I dont have the password, and imagine does not give it to me???
Thanks
MAK
Since I live in one of the Clear WiMax "poor reception zone" scattered through the Las Vegas valley, I need to access the CINR and RSSI statistics to get better reception as WiMax transmit towers are added, removed or reoriented in a different direction.
Anyone with the new password, please post or email to me.
any one know the " new" password?
gust press login without password
HELP ME PLZZ
I using WiMAX CPEi 775
when u enter the site
http://192.168.15.1/
u will be ask the password just click SHIFT + ENTER
that it u will be enter in the device..
it works for me all the time
my neighbor allways changes the password and i enter and change the restirctions again
keep on enjoying the life..............................
How to reset Motorola CPEi 300 password, I forget old password.
Please help me.
regards
can someone tell me its password...??
motorola & clear1234....not working.
Anybody knows default password of WiMAX CPEs from this weird Chinese company called Airspan. My service provider supplied it for my connection.
I contacted them regarding this and they requested I contact them from a corporate email address....how nonsensical for a CPE I bought and is stationed at my house...
Thanks!
pass:user
i want a username password
have anyone know what is password of this device
Just try to press login without typing any password. It happened to me. The original password was "motorola", I tried to change it to something else, then, I wasn't able to log in by Motorola or any other password. I kept trying for more than six months. Only yesterday, I tried to login without entering any password and it worked for me.
It seems there is some problem with the device software....
Try it and let me know if it works for you...
I tryed motorola - clear123 - CLEAR123 + 4 - original password - no password.
i will ring up wimax soon just havint the time.
Help please?
clear123
CLEAR123+4
original password
no password.
PLZZZZ HELPPPP!
Only for multan
only loading....and no connection...
i have Motorla Model : CPEi 35300 . i want to change pasward. neither motorola works no clear123.
how can i change it plz help,
ishfaqurrehman@rocketmail.com
+923219088597
motowimax
motorola
admin
root
user
anonimous
motowimax
axtelwimax
clear123
w0L0m1wVX
neither of them work after I reset my modem to defaults
Networks
Welcom to Nokia Siemens Networks
WiMAX CPE
Try password
nsn
Previous passwords: “motorola”, “CLEAR123?